Programming product codes, Programming the cvr700r1 remote – JBL CVPD50 User Manual

Page 92

In addition to its powerful CVR700R2
remote control, the JBL Cinema Vision
system also includes a smaller CVR700R1
remote intended for everyday use. This
remote features many of the same func-
tions as the main remote, including the
capability of controlling most popular
brands of audio and video equipment,
such as CD players, cable boxes, digital
recording devices, VCRs, satellite
receivers and HDTV set-top tuners, but in
a more compact design.

The CVR700R1 remote control is capable
of operating up to nine devices, including
the CVR700. In order to segregate the
control commands for each device, the
remote’s logic contains a separate “page”
of commands for each device called up
when that device's selector has been
pressed. For example, in order to access
the commands that control the CVPD50
screen, such as Letterbox or PIP, you must
first press the Screen Selector

and an orange light underneath that but-
ton will light. When you press another
button on the remote that is used to con-
trol the screen, the light underneath the
Screen Selector

will blink to con-

firm the current mode.

Programming Product Codes

The remote is factory-programmed for all
CVR700 functions, as well as those of JBL
DVD players. In addition, by following one
of the methods below, you may program
the remote to operate a wide range of
devices from other manufacturers.

The Input Selectors

each may

be programmed with one of several device
types, as listed in the table below. Unlike
the main remote control, the device types
on the secondary remote control may not
be reassigned. It is important to program
your external devices into the correct cor-
responding source buttons so that the
desired remote control commands will be
available for use with your device.

Source

Device Types

Button
AUX

TV, HDTV, VCR, DVD, CD,
Cable, Satellite

VCR

CBL/SAT Cable, Satellite, HDTV
Game/

Game, Camcorder

Cam
DR

DVD-R, CDR, DVHS, TIVO, PVD
(DVR/PVR – Personal Video
Recorder)

DVI/

DVI/DVD, DVI/CBL, DVI/SAT,

COMP

HDTV

The DVD, Tuner, Screen and System selec-
tors may not be reprogrammed.

Direct Code Entry
This method is the easiest way to
program your remote to work with
different products.

1. Use the tables in the following pages

to determine the three-digit code or
codes that match both the product
type (e.g., VCR, TV) and the specific
brand name. If there is more than one
number for a brand, make note of the
different choices.

2. Turn on the unit you wish to program

into the secondary remote.

3. Press and hold both the Input

Selector

for the product

you wish to control (e.g., VCR, TV) and
the Program Button

at the

same time. When the light under the
Input Selector

stays lit,

release the buttons. It is important
that you begin the next step within
20 seconds.

4. Point the remote toward the unit to be

programmed, and enter the first three-
digit code using the Numeric Keys

. If the unit turns off, the correct

code has been entered. Press the
Input Selector

again, and

note that the red light will flash three
times before going dark to confirm the
entry. If the Input Selector
flashes nine times instead of three
times, it means that the code was not
accepted. Check the code table to ver-
ify the code, and reenter it. If you
wish to exit the program mode, press
and hold any Input Selector

for 2 seconds.

NOTE: Since video game consoles and
camcorders do not have Power Off codes,
look for your game device to execute the
“Stop” function, and your camcorder to
execute the “Zoom In” function.

5. If the device to be programmed in

does NOT turn off, continue to enter
three-digit codes until the equipment
turns off. At this point, the correct
code has been entered. Press the
Input Selector

again and

note that the light under the Input
Selector

will flash three

times before going dark to confirm
the entry.

6. Try all of the functions on the remote

to make certain that the product oper-
ates properly. Keep in mind that many
manufacturers use a number of differ-
ent combinations of codes, so it is a
good idea to make certain that not
only the power control, but the vol-

ume, channel and transport controls
work as they should. If functions do
not work properly, you may need to
use a different remote code.

7. If a code cannot be entered to turn

the unit off, if the code for your prod-
uct does not appear in the tables in
this manual, or if not all functions
operate properly, try programming
the remote with the Auto Search
Method.

Auto Search Method
If the unit you wish to include in the
remote is not listed in the code tables in
this manual or if the code does not seem
to operate properly, you may wish to pro-
gram the correct code using the Auto
Search method that follows:

1. Turn on the unit that you wish to

include in the remote.

2. Press the Input Selector

for

the type of product to be entered and
the Program Button

at the

same time. Hold both buttons until the
red light under the Input Selector

stays lit. The next step must

take place while the light is on, and it
must begin within 20 seconds after
the light appears.

3. Point the remote toward the unit to be

programmed, and press either the

⁄

Button

. Each press will send

out a series of codes from the remote’s
built-in database. When the unit being
programmed turns off, release the

⁄ /¤

Button

, as that is your indi-

cation that the correct code is in use.

4. Press the Input Selector

;

the light under it will flash three
times before going dark to confirm
the entry.

5. Try all of the functions on the remote

to make certain that the product oper-
ates. Keep in mind that many manu-
facturers use a number of different
combinations of codes, and it is a
good idea to make certain that not
only the power control works, but also
the volume, channel and transport
controls, as appropriate. If all func-
tions do not work properly, you may
need to Auto-Search for a different
code, or enter a code via the Direct
Code Entry method.

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

26
27

24
23
22

37
36

47
46

PROGRAMMING THE CVR700R1 REMOTE

CVR700 OM 12/17/04 4:24 PM Page 92

This manual is related to the following products:

CVR700