JBL CVPD50 - Manual (Page 8)

8
Moving the Unit
Before moving any of the units, be certain
to disconnect any interconnection cords
with other components, and make certain
that you disconnect the unit from the
AC outlet.
Important Note for CVPD50 Plasma
Display: Always make sure that two
people lift the CVPD50 plasma display
together. Never attempt to lift the unit by
yourself. Failure to follow this instruc-
tion may result in personal injury or
irreparable damage to the unit that is
not covered under warranty.
IMPORTANT NOTE: To avoid damage to
the CVR700 that may not be covered by
the warranty, be certain that all discs are
removed from the unit before it is tilted
in place or moved. Once the CVR700 is
installed, a disc may be left in the unit
when it is turned off, but the unit should
NEVER be tilted or moved with a disc
left in the changer. Failure to do so
may result in discs becoming dis-
lodged and jamming the mechanism
which will require that the unit be
returned to an authorized service
facility for repair.
Important Information for the User
The CVR700 and CVPD50 have been tested
and found to comply with the limits for a
Class B device, pursuant to Part 15 of
FCC Regulations 47. Operation is subject
to the following conditions: (1) These
devices may not cause harmful interfer-
ence, and (2) these devices must accept
interference received, including interfer-
ence that may cause undesired operation.
These limits are designed to provide rea-
sonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses and can radiate
radio-frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communication. However,
there is no guarantee that harmful inter-
ference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
■ Reorient or relocate the receiving
antenna.
■ Increase the separation between the
equipment and receiver.
■ Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
■ Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications may
cause these units to fail to comply with
Part 15 of the FCC Rules and may void the
user’s authority to operate the equipment.
CAUTION: The CVR700 uses a laser sys-
tem. To prevent direct exposure to the
laser beam, do not open the cabinet
enclosure or defeat any of the safety
mechanisms provided for your protection.
DO NOT STARE INTO THE LASER BEAM.
To ensure proper use of this product,
please read this owner’s manual carefully
and retain it for future use. Should the
unit require maintenance or repair, please
contact your local JBL service center. Refer
servicing to qualified personnel only.
The following is important safety infor-
mation that you should read carefully in
order to prevent the possibility of person-
al injury to yourself or others, or damage
to the equipment. Errors in installation or
connection may lead to damage to the
CVPD50, the CVR700 or other devices in
your system.
Never allow children to use the CVPD50,
CVR700 or any other electrical appliances
without supervision. Take care to install
these devices where they are safe from
children and pets.
Never operate the CVPD50 plasma dis-
play in environmental conditions other
than those listed in the technical specifi-
cations on pages 111–112 of this manual.
Protect the CVPD50 plasma display and
the CVR700 from moisture, including high
levels of humidity, proximity to standing
water, dripping water, spray water and
rain. Do not install this equipment out-
doors, near a hot tub or in a bathroom.
Do not put any vessels that are filled
with water, such as vases, on the unit. If
you connect an external antenna to any
device connected to the CVR700, ensure
that no water can penetrate the cable.
Protect this equipment from heat, heat
accumulation and direct sunlight. Avoid
placing the unit near fire, heat sources or
ovens. Maintain sufficient space on all
sides of the unit for proper ventilation.
Do not drape curtains over the unit. Do
not mount the unit in an enclosed
cabinet or wall.
Failure to follow these instructions
may lead to personal injury or death
due to electric shock and/or fire
caused by overheating, and/or
irreparable damage to the unit that
is not covered under warranty.
CVR700 OM 12/17/04 4:23 PM Page 8