Icom IC-208H User Manual

Page 79

OTHER FUNCTIONS

D Active band

Selects the frequency selecting condition via [DIAL] or [Y]/[Z]
on the microphone from all (AL) and single (SI).

• All (AL)

: The operating frequency can be selected

continuously.

• Single (SI) : The operating frequency can be selected

within the current band. Pushing [BAND] for
1 sec. then tuning dial rotation is necessary
for frequency band selection.

D Narrow TX function

Select the narrow TX function ON and OFF.

• ON

: Enables the FM-narrow mode transmission. The

deviation (modulation level) becomes half from
the regular FM transmission can be performed.

• OFF : Inhibits the FM-narrow mode transmission. The

regular FM deviation transmission is performed
(“NAR” indication disappears) even when FM-
narrow is selected.

D DTMF speed

The rate at which DTMF memories send individual DTMF
characters can be set to accommodate operating needs.

• 1 : 100 msec. interval; 5.0 cps speed
• 2 : 200 msec. interval; 2.5 cps speed
• 3 : 300 msec. interval; 1.6 cps speed
• 5 : 500 msec. interval; 1.0 cps speed