Icom IC-208H User Manual

Page 43

MEMORY OPERATION

D Programming a memory channel via the microphone

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.

Push 10 times

Beep

“

Beep

“

Beep

“

Push

Push then

Push then for 1 sec. and continue to push

➠

The microphone can also be used to program mem-

ory channels.

z Set the desired frequency in VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency using the keypad.

➥ Set other data

(e.g. offset frequency, duplex direction, sub-

audible tone encoder ON/OFF and its frequency)

, if neces-

sary.

x Push [FUNC] then [

CLR

A(MW)] momentarily.

c Push [Y] or [Z] to select the memory channel.

•

Direct numeral input cannot be used

v Push [FUNC] then [

CLR

A(MW)] for 1 sec. to program.

➥ 3 beeps may sound and the VFO contents (including

the subaudible tone frequency, etc.) are programmed.

➥ Memory channel number increases when continuing to

push [

CLR

A(MW)] after programming.