Icom IC-208H - Manual (Page 24)

9
1
PANEL DESCRIPTION
➥ Cancels frequency entry.
(p. 12)
➥ Cancels the scan or priority watch.
(pgs. 41, 47)
➥ Exit set mode. (p. 56)
➥ Enters set mode (p. 56)
➥ Advances the set mode selection order
after entering set mode. (p. 56)
➥ Sets the keypad for numeral input.
(p. 12)
➥ Reverses the set mode selection order
after entering set mode. (p. 56)
Adjusts the squelch level increments.
(p. 15)
Decreases audio output level. (p. 15)
Adjusts the squelch level decrement.
(p. 15)
➥ Selects a memory channel for program-
ming. (p. 28)
➥ Advances the memory channel number
when continuously pushed after pro-
gramming is completed.
(p. 28)
DTMF memory encoder function OFF.
(p. 50)
Turns the subaudible tone encoder, pocket
beep or CTCSS/DTCS tone squelch OFF.
(pgs. 21, 53)
Mutes the audio. (p. 18)
• Mute function is released when any oper-
ation is performed.
Sends a 1750 Hz tone signal for 0.5 sec.
(p. 23)
Locks the digit keys on the keypad (includ-
ing the A to D, # and M keys).
(p. 14)
After pushing :
Transmits the appropriate
DTMF code.
(pgs. 23, 50)
KEY FUNCTION SECONDARY FUNCTION ( +key) OTHER FUNCTIONS