Icom IC-208H - Manual (Page 76)

61
11
OTHER FUNCTIONS
■ Initial set mode
The initial set mode is accessed at power ON and al-
lows you to set seldom-changed settings. In this way,
you can “customize” transceiver operations to suit your
preference and operating style.
• Initial set mode items
D D Entering initial set mode
q While pushing [SET•LOCK], push [PWR] for 1 sec. to enter
initial set mode.
w Push [SET•LOCK] or [S.MW•MW] to select the desired
item.
e Rotate [DIAL] to select the condition or value.
r Push [PWR] momentarily to exit initial set mode.
AT POWER ON
• Active band
• Key-touch beep • Time-out timer • Auto repeater*
• Squelch attenuator • Microphone sensitivity
• Auto power off
• DTMF speed
• Squelch delay
• Data speed
• Cooling fan
*Available in the USA version only.
• Narrow TX
: Push (front panel); or (microphone)
: Push (front panel); or (microphone)