Icom IC-208H - Manual (Page 37)

22
4
REPEATER OPERATION
4
■ Subaudible tones
[
(Encoder function)
D Subaudible tones
q Select the frequency band, mode/channel you wish to set
the subaudible tones, such as VFO mode or memory/call
channel.
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [DUP•MONI] several times until “T”
and “rT” appear; or until “T SQL” and “CT” appear for tone
squelch or pocket beep use.
• When “d” is displayed in place of the 100 MHz digit, cancel the
DTMF memory encoder in advance. (p. 50)
r Rotate [DIAL] to select and set the desired subaudible fre-
quency.
t Push [V/MHz•SCAN] to exit set mode.
☞NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.
z Set the frequency band, mode/channel you wish
to set the subaudible tones, such as VFO mode
or memory/call channel.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
x Push [
SET B(D-OFF)] to enter set mode.
c Push [
SET B(D-OFF)] or [ ENT C(T-OFF)] several
times until “T” and “rT” appears; or until “T SQL”
and “CT” appears for tone squelch or pocket
beep use.
• When “d” is displayed in place of the 100 MHz digit,
cancel the DTMF memory encoder in advance. (p. 50)
v Push [Y] or [Z] to select and set the desired
subaudible tone frequency.
• Push and hold [Y]/[Z] to change the above tones
continuously.
b Push [
CLR A(MW)] to exit set mode.
• Subaudible tone frequency list (unit: Hz)
67.0
69.3
71.9
74.4
77.0 79.7
82.5
85.4
88.5
91.5 94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3 131.8
136.5
141.3
146.2
151.4 156.7
159.8
162.2
165.5
167.9 171.3
173.8
177.3
179.9
183.5 186.2
189.9
192.8
196.6
199.5 203.5
206.5
210.7
218.1
225.7 229.1
233.6
241.8
250.3
254.1
Push
SET
B
[SET•LOCK] “T” and “rT” appears