Programming channel names – Icom IC-208H User Manual

Page 46

MEMORY OPERATION

■ Programming channel names

Each memory channel and the call channel can be pro-
grammed with an alphanumeric channel name for easy
recognition and can be indicated independently by channel.
Names can be a maximum of 6 characters— see the table
below for available characters.

q Push [S.MW•MW] momentarily.

• “!” and memory channel number blink.

w Rotate the tuning dial to select the desired memory or call

channel.

e Push [BAND] to select the memory name programming

condition.

• Frequency readouts disappear and a cursor blinks.

r Rotate the tuning dial to select the desired character.

• The selected character blinks.

t Push [SET•LOCK] to move the cursor to the right.
y Repeat steps r and t until the desired channel names

are displayed.

u Push [S.MW•MW] for 1 sec. to program the name and exit

the channel name programming condition.

(1)

(B)

(L)

(V)

(+)

(2)

(C)

(M)

(W)

(–)

(3)

(D)

(N)

(X)

(=)

(4)

(E)

(O)

(Y)

(

✱)

(5)

(F)

(P)

(Z)

(/)

(6)

(G)

(Q)

(space)

(7)

( ( )

(H)

(R)

( ) )

(8)

(I)

(S)

(|)

(9)

(J)

(T)

(0)

(A)

(K)

(U)

[EXAMPLE]: Programming “CLUB” into memory channel 1.

Rotate

Push

Rotate

Push for 1 sec.

Repeat the

steps.

Beep

“

Push