Icom IC-208H - Manual (Page 50)

35
5
MEMORY OPERATION
■ Memory bank selection
The IC-208H has a total of 10 banks (A to J) . Regular memory
channels, 1 to 500, are assigned into the desired bank for
easy memory management.
q Push [M/CALL•PRIO] several times to select memory
mode, if desired.
w Push [BAND] to select memory bank condition.
• Bank’s initial blinks
e Rotate [DIAL] to select the desired bank, A to J.
• Banks that have no programmed contents are skipped.
r Push [BAND] to set the bank.
• Bank’s initial stops blinking.
t Rotate [DIAL] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory condition, push [BAND] twice.
z Push [MR/CALL] to select memory mode, if de-
sired.
x Push [FUNC] then [
MONI
1(BANK)] to select
memory bank condition.
• Bank’s initial blinks
c Push [Y]/[Z] to select the desired bank, A to J.
• Only programmed memory bank can be selected.
v Push [
CLR
A(MW)] to set the bank.
• Bank’s initial stops blinking.
b Push [Y]/[Z] to select the desired contents in
the bank.
• No channel numbers are displayed for memory
bank operation.
n To return to regular memory condition, push
[FUNC], [ MONI 1(BANK)] then push
[ CLR A(MW)].
BANK
[Y]/[Z]
[BAND] Bank initial blinks