Icom IC-208H - Manual (Page 51)

36
5
MEMORY OPERATION
5
■ Memory bank setting
[
q Push [M/CALL•PRIO] several times to select memory
mode, then select the desired memory channel via [DIAL].
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [S.MW•MW] several times until
“BAK” appears.
r Rotate [DIAL] to select the desired bank to be set.
t Push [V/MHz•SCAN] to exit set mode.
z Push [MR/CALL] then select the desired mem-
ory channel via [Y]/[Z] or keypad.
x Push [
SET B(D-OFF)] to enter set mode.
c Push [
SET B(D-OFF)] or [ ENT C(T-OFF)] several
times until “BAK” appears.
v Push [Y]/[Z] to select the desired bank to be
set.
b Push [
CLR A(MW)] to set the channel into the
bank and exit set mode.
SET
B
[SET•LOCK] Bank’s initial blinks