Icom IC-208H User Manual

Page 47

MEMORY OPERATION

Channel names can also be programmed via the mi-

crophone.

z Push [FUNC] then [

CLR

A(MW)] momentarily.

• “!” and memory channel number blink.

x Push [Y]/[Z] to select the memory/call channel to be as-

signed memory names.

c Push [BAND].

• Frequency readouts disappear and a cursor blinks.

v Push [Y]/[Z] to select the desired character.

• The selected character blinks.

b Push [

SET

B(D-OFF)] or [

ENT

C(T-OFF)] to move the cur-

sor to left or right, respectively.

n Repeat steps v and b until the desired channel names

are displayed.

m Push [FUNC] then [

CLR

A(MW)] for 1 sec. to program the

name and exit the channel name programming condition.

[EXAMPLE]: Programming “CLUB” into memory channel 1.

Push

Repeat the

steps.

Beep

“

Push to select the channel.

Push to select the character

Push or to move the cursor.

Push , then push .

Push , then push for 1 sec.