IBM EasyCoder 3400e User Manual

Page 124

EasyCoder 3400e Bar Code Label Printer User’s Manual

HelvC

NugFont

C-10

Straight Through DTE to DCE Cable for Use with a Modem (Part Number 043237S)

SHIELD

PRINTER

25-PIN (PLUG) D-SUB

METAL BACKSHELL

CHASSIS GROUND

TRANSMITTED DATA

RECEIVED DATA

REQUEST TO SEND

CLEAR TO SEND

DATA TERMINAL READY

SIGNAL GROUND

25-PIN (PLUG) D-SUB
METAL BACKSHELL

CHASSIS GROUND

TRANSMITTED DATA

RECEIVED DATA

REQUEST TO SEND

CLEAR TO SEND

DATA TERMINAL READY

SIGNAL GROUND

NOTE: The metal backshell is connected directly
to the shield to achieve electrostatic discharge
(ESD) immunity.

MODEM

➤

3XXXU.O12

Note: If you find that you are losing data, you may need to isolate the chassis ground
from one of the two devices by connecting it to the shield.

RS-422 Intermec Pin Assignments

3XXXU.013

PRINTER

HOST

NOTE: Connect pin 1 to shield
at one end only.

➤

Input RxDB

Input RxDA

Output TxDA

Output TxDB

➤

SHIELD

Note: The host in this case includes Intermec products that support RS-422. Non-
Intermec controllers may have different pin assignments.