beautypg.com

Printer options, Communication interface, Finishers – IBM EasyCoder 3400e User Manual

Page 100

background image

EasyCoder 3400e Bar Code Label Printer User’s Manual

HelvC NugFont

C

39

A-6

Printer Options

This page contains a list of the options you can use with the printer along with a brief
description. Consult your Intermec representative to order any option.

Communication Interface

EasyLAN 10

i

Interface

This option lets you connect your printer to a 10bBaseT Ethernet network. Various
network printing protocols are available. For more information, see your EasyLAN 10i
documentation.

Twinax Interface

This option lets you connect your printer to an IBM twinaxial cable system with a
twinax interface so your printer emulates an IBM 5256 Model 1 printer and can operate
with an IBM System/34, System/36, System/38, or AS/400 host computer.

Coax Interface

The coax interface adapter allows the printer to emulate an IBM 3287 printer by
connecting the printer to IBM 3270 Type A coaxial cable computer systems operating
in the VTAM (CICS/IMS/TSO) or 8100 (DPPX) environments. With the coaxial
adapter you can connect the printer to an IBM 3174/76/99 system
controller/multiplexer.

Finishers

Cutter

Use the cutter option to cut continuous media into individual labels ready for use. This
3400 option works best for individual random lengths or short batches of different label
lengths.

Batch Takeup

This device automatically spools labels as they are printed. This attachment is limited
to small batches with maximum outer diameter (OD) of 12.7 centimeters (5 inches).

Self-Strip Printing

Use self-strip printing in applications where you want to apply labels to a surface
immediately. After printing a label, the printer prints out the label with the backing
removed. This option must be ordered when you order your printer.