beautypg.com

Set lengths for code 11, Set lengths for code 11 -60 – Motorola SYMBOL MINISCAN MSXX04 User Manual

Page 166

background image

10 - 60 Symbol MiniScan MSXX04 Series Integration Guide

Set Lengths for Code 11

Parameter # L1 = 1Ch, L2 = 1Dh

The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Lengths for Code 11 can be set for any length, one or two discrete lengths, or lengths
within a specific range.

One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select Code 11 One Discrete Length, then scan 1, 4, to limit the decoding to only Code 11 symbols containing 14
characters. Numeric bar codes begin on

page 10-111

. To change the selection or cancel an incorrect entry, scan

the

Cancel

bar code on

page 10-113

.

Code 11 - One Discrete Length

Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select Code 11 Two Discrete Lengths, then scan 0, 2, 1, 4, to limit the decoding to only Code 11
symbols containing 2 or 14 characters. Numeric bar codes begin on

page 10-111

. To change the selection or

cancel an incorrect entry, scan the

Cancel

bar code on

page 10-113

.

Code 11 - Two Discrete Lengths

Length Within Range - Select this option to decode only those codes within a specified range. For example,
to decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 Length Within Range,
then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes
begin on

page 10-111

. To change the selection or cancel an incorrect entry, scan the

Cancel

bar code on

page

10-113

.

*Code 11 - Length Within Range

Any Length - Scan this option to decode Code 11 symbols containing any number of characters.

Code 11 - Any Length