Motorola SYMBOL MINISCAN MSXX04 - Manual (Page 164)

10 - 58 Symbol MiniScan MSXX04 Series Integration Guide
Set Lengths for Code 93
Parameter # L1 = 1Ah, L2 = 1Bh
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Lengths for Code 93 can be set for any length, one or two discrete lengths, or lengths
within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select Code 93 One Discrete Length, then scan 1, 4, to limit the decoding to only Code 93 symbols containing 14
characters. Numeric bar codes begin on
page 10-111 . To change the selection or cancel an incorrect entry, scan
the Cancel bar code on page 10-113 .
Code 93 - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select Code 93 Two Discrete Lengths, then scan 0, 2, 1, 4, to limit the decoding to only Code 93
symbols containing 2 or 14 characters. Numeric bar codes begin on
page 10-111 . To change the selection or
cancel an incorrect entry, scan the Cancel bar code on page 10-113 .
Code 93 - Two Discrete Lengths
Length Within Range - Select this option to decode only those codes within a specified range. For example,
to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 Length Within Range,
then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes
begin on
page 10-111 . To change the selection or cancel an incorrect entry, scan the Cancel bar code on page
10-113 .
*Code 93 - Length Within Range
Any Length - Scan this option to decode Code 93 symbols containing any number of characters.
Code 93 - Any Length