Set lengths for code 39, Set lengths for code 39 -52 – Motorola SYMBOL MINISCAN MSXX04 User Manual
Page 158
10 - 52 Symbol MiniScan MSXX04 Series Integration Guide
Set Lengths for Code 39
Parameter # L1 = 12h, L2 = 13h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for Code 39 may be set for any length, one or two discrete lengths, or lengths within a
specific range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options.
One Discrete Length - This option limits decodes to only those Code 39 symbols containing a selected length.
Lengths are selected from the numeric bar codes beginning on
. For example, to decode only Code
39 symbols with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4. To change the
selection or cancel an incorrect entry, scan the
bar code on
.
Code 39 - One Discrete Length
Two Discrete Lengths - This option limits decodes to only those Code 39 symbols containing either of two
selected lengths. Lengths are selected from the numeric bar codes beginning on
. For example, to
decode only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete
Lengths, then scan 0, 2, 1, and then 4. To change the selection or cancel an incorrect entry, scan the
bar code on
.
Code 39 - Two Discrete Lengths
Length Within Range - This option limits decodes to only those Code 39 symbols within a specified range.
The range is selected using the numeric bar codes beginning on
. For example, to decode Code 39
symbols containing between 4 and 12 characters, first scan Code 39 Length Within Range. Then scan 0, 4, 1
and 2 (single digit numbers must always be preceded by a leading zero). To change the selection or cancel an
incorrect entry, scan the
bar code on
.
*Code 39 - Length Within Range
Any Length - Scan this option to decode Code 39 symbols containing any number of characters.
Code 39 - Any Length