Trigger modes, Trigger modes -14, Trigger modes parameter # 8ah – Motorola SYMBOL MINISCAN MSXX04 User Manual
Page 120
10 - 14 Symbol MiniScan MSXX04 Series Integration Guide
Trigger Modes
Parameter # 8Ah
•
Level - A trigger pull activates the laser and decode processing. The laser remains on and decode
processing continues until a trigger release, a valid decode, or the Laser On Time-out is reached.
•
Pulse - A trigger pull activates the laser and decode processing. The laser remains on and decode
processing continues until a valid decode or the Laser On Time-out is reached.
•
Continuous - The laser is always on and decoding.
•
Blink - This trigger mode is used for triggerless ScanStand operation. Scanning range is reduced in this
mode. This mode is only supported by Symbol MS1204FZY and MS954.
•
Host - A host command issues the triggering signal. The scanner interprets an actual trigger pull as a Level
triggering option.
*Level
(00h)
Pulse
(02h)
Continuous
(04h)
Host
(08h)
Blink
(07h)