Motorola SABER RVN4002K - Manual (Page 8)

• GET/SAVE/PROGRAM codeplug data from/to disk/codeplug is used to read codeplug
data from disk or a radio and/or program/save the modified codeplug data back to disk or
to the radio.
• CHANGE/CREATE/VIEW radio codeplug, provides a multi-level menu that is used to
change, create, or view codeplug features and option configurations.
• PRINT will print the radio personality present in the current Radio Service Software. A
printer is required and should be connected to the LPT1 parallel port of an IBM PC.
• SETUP COMPUTER CONFIGURATION will configure your SABER Radio Service
Software to your particular application and computer.
• EXIT will leave the Radio Service Software and return to DOS.
C. Customer Support
If you encounter a problem, first review your hardware setup (Section III-C.) and the information
provided on Error Messages in Appendix -1.
Problems requiring additional analysis will be referred to the appropriate Area FTR (Field
Technical Representative) group for investigation. Radio Service Software problems will be
handled by the Area FTR manager within standard MOTOROLA C&E procedures for the
resolution of technical product problems.
2 Introduction