Motorola SABER RVN4002K - Manual (Page 21)

B. How To Configure The Software For Your Computer
The first time the Radio Service Software is installed on a floppy disk system or the hard disk
system, the program will initially respond with the MAIN menu. To configure your computer press
F9 for SETUP Computer Configuration Menu. The screen as shown in Figure 5 will come up.
The SERVICE SOFTWARE CONFIGURATION Menu has several system options that need to be
setup in your configuration file. This procedure only needs to be setup once when installing the
system. Each function key is explained below in order to configure your computer completely.
Figure 5. Setup Computer Configuration
F1 - Help for Computer Setup
F2
F3 - PC Configuration: Drives, Paths, Ports, etc...
F4
F5
F6
F7 - Screen Color Configuration
F8 -
F9
F10 - EXIT
MOTOROLA Radio Service Software
SABER Model:
Ver. R05.00.00
Main.Setup
Select Function Key F1 - F10
F1
HELP
F2 F3
PC
CONFIG
F4 F5 F6 F7
SCREEN
COLOR
F8 F9 F10
EXIT
SETUP COMPUTER CONFIGURATION MENU
R07.01.00
15 Software Installation