Motorola SABER RVN4002K - Manual (Page 55)

The basic keyboard functions can be used on this screen, see Section VIII-F.
In order to select/deselect an option use the F2 function key which acts as a toggle key. The
table below provides a list of options available for the different SABER models. See Appendix-5
for detailed descriptions on each available option.
Option Description Radio Type
H251 60 second TOT SABER I, II, III
H901 Non-standard TOT SABER I, II, III
H153 Omit all tones SABER I, II, III
H365 Transmit inhibit on busy channel SABER I, II, III
H359 Channel busy LED SABER I, II, III
H958 Unit ID - MDC 600 SABER I, II, III
H959 Unit ID - MDC 1200 SABER I, II, III
H961 Unit ID & Emergency - MDC- 600 TM SABER I, II, III
H962 Unit ID & Emergency - MDC- 1200 TM SABER I, II, III
H963 Unit ID w/ audible Emergency - MDC- 600 SABER I, II, III
H967 Unit ID w/ audible Emergency - MDC -1200 SABER I, II, III
H923 Unit ID w/ emergency revert - MDC -600 SABER I, II, III
H946 Unit ID w/ emergency revert - MDC- 1200 SABER I, II, III
No Channel Re-Revert After Emergency SABER I, II, III
H770 Pretime Delay - 300ms SABER I, II, III
H771 Pretime Delay - 700 ms SABER I, II, III
H779 Non-standard pretime delay SABER I, II, III
H619 Omit Side Tones SABER I, II, III
H371 Zone and Channel Operation SABER II, III
H396 Channel Only Operation SABER II, III
H560 Talkaround SABER IE
H256 Two Zone Operation SABER IE
H384 Muting via Keypad SABER II, III
H346 Zone Display Names SABER II, III
H380 Channel Display Names SABER II, III
H368 Autodial SABER II, III
H669 Omit Inadvertent Lock SABER II, III
H670 Omit memory - 2K memory option SABER II
H397 Menu Lock SABER III
H345 Radio Lock SABER III
H297 Manual Telephone Interconnect SABER III
H906 Low Battery LED SABER II, III
H444 Delete Proper Code Detect SABER I, II, III
H245 Delete Clear Mode Alert Tones on Transmit SABER I, II, III
H244 Delete Clear Coded Transmit Switch SABER I, II, III
H400 Secure Voice Slaved to a Mode SABER I, II, III
H401 Clear Voice Slaved to a Mode SABER I, II, III
H432 VP Capable Only SABER I, II, III
H375 Selectable PL/DPL (Encode only) SABER II, III
H649 Selectable PL/DPL (Encode/Decode) SABER II, III
H344 Mode Slaved Scan SABER II, III
2nd Fixed Priority SABER II, III
Nuisance Mode Delete SABER II, III
Scroll Scan List SABER II, III
Designated Transmit Mode SABER II, III
Priority to Follow Channel Selector Switch SABER II, III
Auto Scan SABER II, III
H273 Operator Selectable Scan SABER III
Mode Slaved Scan for SABER II.2 SABER II (CLEAR Only)
49 Change/Create/View Radio Personality