Motorola SABER RVN4002K - Manual (Page 67)

Function Key Descriptions:
F3 Add Entry - The Add entry function key will re-prompt you for a new autodial entry
and return the cursor to Telephone # . For every additional entry, be sure to include
all the required information. Note, the access and hangup codes both have a
maximum of eight characters available to be entered. Below the dotted line each
entry will be listed as entered.
F4 Delete Entry - This function will delete the present auto dial entry. The program will
prompt you to be sure you want to delete the entry, type in 'y' for yes and 'n' for no.
F5 Print - This function will make a hard copy of the autodial setup screen.
E. Manual Interconnect Access and Hangup Codes
The Manual Interconnect menu is shown in Figure 30. Simply enter the the Access Code
and Hangup Code using the ENTER key to move between the selections. Both Codes have
a possible eight character field. The only Function Key Description for this menu is the
PRINT function (F5), which makes a hard copy of the Manual Interconnect Access and
Hangup screen.
Figure 30. Manual Telephone Interconnect Screen
F1
HELP
F4 F2 F3 F5
PRINT
F6 F7 F8 F9 F10
EXIT
MOTOROLA Radio Service Software
SABER Model:
Ver. R05.00.00
Main.Create/Modify.Access
Use UP/DWN arrow keys to select
or Enter ACCESS CODE.
MANUAL TELEPHONE INTERCONNECT
Access Code: Hangup Code:
R07.01.00
Change/Create/View Radio Personality 61