C. align channel parameters – Motorola SABER RVN4002K User Manual

Page 36

C. Align Channel Parameters

In order to align the channel level parameters, squelch, VCO Modulation, Reference Modulation,
and Battery Save Enable, select the ALIGN CHANNEL PARAMETERS item in the ALIGN menu.
These parameters are called channel level parameters because they have to be adjusted on
every channel as opposed to the radio level parameters which apply to all the channels in the
radio. Once the ALIGN CHANNEL menu has been selected, the system will display the screen
shown in Figure 11. At the bottom of the screen the current zone/channel combination being
aligned will be displayed. Merely select the next zone/channel on the radio to be aligned and the
screen will update the display.

Figure 11. Align Channel Menu

Note that on certain alignment procedures, the last step states "Reprogram radio," this means
AFTER all alignment is completely finished, you must reprogram the radio. You do not have to
reprogram the radio after each parameter is aligned.

Function Key Descriptions:

Copy to all - This function key will copy a particular alignment parameter value to all

the channels. For example, If VCO for the current channel is $1F, pressing F2 will set
VCO to $1F in all channels.

Copy to zone - This function key will copy the particular alignment parameter value to

all the channels in the current zone.

MOTOROLA Radio Service Software
SABER Model
Ver. R05.00.00

Use UP / DWN Arrows to Change Value.
PGUP /PGDN to Change Rapidly.

Squelch Level
VCO Modulation
Reference Modulation
Battery Save Enable

HELP

COPY

TO ALL

COPY TO

ZONE

SCREEN

COPY ALL

TO ALL

F10

EXIT

Main.Align.Channel

ALIGN CHANNEL PARAMETERS

00
00
00
00

100%

Rx: 150.00 MHz
Sq.: 167.9 6Z

Zone01: Channel 001
Sq.: NOT DETECTED

Tx: 150.000 MHz
Sq.: 167.9 6Z

R07.01.00

Servicing the Radio