Motorola SABER RVN4002K - Manual (Page 35)

11. MICROPHONE GAIN
This parameter is used when sending out the voice signal. There are 4 different values from
which you can choose : -3 dB, 0 dB (default), +3 dB, and +6 dB. The radio has to be
reprogrammed to see the effect of the change. This will only work on radios with the H852,
6D master option enabled or the H549, 8D master option enabled.
(a) Follow the setup procedure in Section VI-A, Fig. 8.
(b) Determine the microphone gain you wish to have and use the UP/DOWN or
PGUP/PGDN arrow keys to increase/decrease these values.
(c) Reprogram radio if finished with ALL alignment functions.
Once you have completed the radio level alignment adjustments, press the F10 key to
return to the SERVICE menu.
Servicing the Radio 29