Motorola SABER RVN4002K - Manual (Page 65)

The list of all possible data displayed on the channel information includes:
T
= Time Out Timer
M = MDC ID Enabled
R = Emergency Revert Channel
C = Channel Strapped CLEAR
S = Channel Strapped CODED
X = Secure Range Extension Enabled
n = Assigned Scan List (if any) ( 2 Characters long )
Q = Quik-Call II
F = Flat Audio Enabled
D = MDC Decode ENABLED
P = Emergency PTT
O = DOS MUTING
I = Transmit INHIBIT on BUSY CHANNEL
1-8 : Repeater Index
1/2/M : RAT1
1/2/M : RAT2
1/2/M : PTT
If a given attribute is not assigned or disabled, then a period "." is printed in its place. By
moving the cursor to the specified zone/channel and pressing F4 or ZOOM, the complete
channel information screen on that channel will be displayed.
F5 Print - This print function allows you to print out all the channel DC ID Table - This
function key displays the Repeater Access Codes (MDC) if any of the Multiple Repeater
Access Codes options were chosen.
F7 Copy Freq - This function key will copy the frequency entered from TX FREQ to RX
FREQ and vice versa.
F8 Copy PL - This function key will copy the PL entered from TX PL to RX PL and
vice versa.
Change/Create/View Radio Personality 59