F. format scan lists – Motorola SABER RVN4002K User Manual

Page 68

F. Format Scan Lists

The Format Scan List menu is only available for a Scan Capable radio. This option allows
you to define your scan lists, priority channels, designated transmit channels, as well as all
non-priority channels. You must set up your channels before using this screen. Note that
while entering channel information for the first time you will not be allowed to select any scan
list in the channel screen. after you have created your scan lists, you may return to the
channel information, and make your scan list selections.

Enter all channels without reference to scan lists.

Enter scan lists.

Return to the channel information screen to slave channels to a scan list.

This two phase process is to prevent channels from referencing non-existent scan lists, and
to prevent scan lists from referencing non-existent channels.

For a description of how some of the Scan options work, see Appendix-5 on Options list and
definitions. Figure 31 displays the CREATE/MODIFY SCAN LISTS screen with all possible
entries shown for a Zone/Channel radio. A similar screen will come up for a Channel only
radio with only channel data entries. You can have up to ten non-priority channels in a scan
list with at least one non-priority channel entered to define a list. Use the ENTER key to
move between entries and the UP/DN arrow keys to select which scan list you wish to
modify. After defining all non-priority channels, press ENTER and define your priority
channels if applicable.

Figure 31. Create/Modify Scan Lists Screen

MOTOROLA Radio Service Software
SABER Model:
Ver. R05.00.00

Use UP / DWN arrows to select scanlists
or enter a zone number.

CREATE / MODIFY SCANLISTS

Main.Create/Modify.Scan

Scanlist #: 01

Total Scanlists : 00

Priority 1: __ / __
Priority 2: __ / __

Designated TX: __ / __

Non - Priority

__ / __

HELP

DELETE

SCANLIST

DELETE

ENTRY

F10

EXIT

R07.01.00

Change/Create/View Radio Personality