Multiquip MQ POWER WHISPERWATT SERIES 60HZ GENERATOR (STD.) (KOMATSU SAA6D170E-3 DIESEL ENGINE) DCA800SSK2 - Manual (Page 45)

DCA800SSK2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (09/03/09) — PAGE 45
TRAILER MAINTENANCE
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
Start all wheel lug nuts by hand. 1.
Torque all lug nuts in sequence (see Figure 68). 2. DO
NOT torque the wheel lug nuts all the way down.
Tighten each lug nut in 3 separate passes as defi ned
by Table 15.
After fi rst road use, retorque all lug nuts in sequence. 3.
Check all wheel lug nuts periodically.
Tire Torque Requirements Table 15.
Wheel Size
First Pass
FTLBS
Second Pass
FTLBS
Third Pass
FTLBS
12" 2025 3540 5065
13" 2025 3540 5065
14" 2025 5060 90120
15" 2025 5060 90120
16" 2025 5060 90120
Wheel Lug Nuts Figure 68.
Tightening Sequence
NOTICE
NEVER use an pneumatic air gun to tighten wheel
lug nuts.