Specifications, English, Speficications – MITSUBISHI ELECTRIC DX-NT400E User Manual
Page 83
83
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Speficications
ENGLISH
Specifications
Rated Power Supply:
AC 100 - 240 V 50/60 Hz
Rated Input:
0.4 - 0.2 A (100 - 240 V) (with 2 HDDs described on page 14 attached )
Color System:
PAL-type color system
Operating Temperature:
5
°
C to 40
°
C
Relative Humidity:
Max. 80 %
Altitude:
Max. 2000 m
Dimensions:
300 (Width) x 343 (Depth) x 88 (Height) mm
Weight:
5.8 kg
Recording System
Digital recording method using WAVELET compression
Sampling
13.5 MHz
Data Compression
WAVELET
Compression Unit
Field
Resolution
684 x 288
Recording Device
3.5 inch IDE HDD x 2 (Maximum capacity: 2 TB)
Use with attached to the HDD tray
Video Input:
4 Input BNC-Connector:
1.0 V (p-p), 75
Video Output:
1 Output BNC-Connector:
1.0 V (p-p), 75
Audio Input:
1 Input RCA-Pin plug:
308 mV (rms), 50 k
Audio Output:
1 Output RCA-Pin plug:
308 mV (rms), 1 k
Timer Program:
8 programs-Daily start and stop time for one week x 3 set
Memory Backup:
Lasts for more than 1 month
CONNECTORS
ALARM IN(1-4) Input:
Terminal for starting alarm recording
EMERGENCY Input:
Terminal for starting emergency recording
GND:
Terminal for ground
MODE OUT(1-5) Output:
Terminal for indication of the operational state of the unit
RS-232C:
RS-232C (D-SUB 9 pin) connector for connection with personal computer
ETHERNET:
Connector: RJ-45 connector, Physical interface: 10BASE-T
REMOTE:
Connection with the wired remote control R-400
Rating:
MODE OUT(1-5)
Active:
“Low” Level
Max. Drive current 7 mA DC
Non active:
Open
Max. Voltage +24 V DC
EMERGENCY
Active:
When terminals are short-circuited or “Low” Level voltage is applied
Non active:
Open
Accessories
AC power cord
2 (for U.K/for the Continent)
Wired remote control R-400
1 (Length of the cable: 2 m)
Screw to attach the HDD holder to the HDD
8
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
This unit complies with the European EMC test standard EN50130-4.