MITSUBISHI ELECTRIC DX-NT400E - Manual (Page 7)

ENGLISH
7
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
Setting the motion detection
• Select the camera number.
See “ ■ SELECTION CAMERA NUMBER” on page 38.
• Set the detection areas.
See “ ■ DETECTION MASK SETTING” on page 38.
• Set the sensitivity.
See “ ■ SENSITIVITY” on page 39.
• Set the minimum number of dots for starting the motion detecting operation.
See “ ■ MOTION THRESHOLD” on page 39.
• Set the restriction of motion detection function.
See “ ■ MD LOCK OUT TIME” on page 40.
Setting the timer recording
• Select the normal & alarm recording or pre-alarm recording.
See “ ■ Recording mode settings A to D for normal recording and alarm recording” on page 46.
• Set the recording mode.
• Select the camera selection during the alarm recording.
See “ ■ Recording mode settings for normal recording and alarm recording” on pages 41 to 43.
• Set the interval/picture grade for normal recording and alarm recording.
See “ ■ Setting the recording interval and recording picture quality for normal recording” on pages
25 and 26.
• Set the duration of alarm recording.
See “ ■ ALARM REC DURATION” on page 46.
• Set the duration of pre-alarm recording.
See “ ♦ PRE ALARM REC” on page 43, and “ ■ Pre-alarm recording time table” on pages 77 and 78.
• Set the timer program mode.
See “” on pages 44 to 46.
• Set the holiday.
See “ ■ HOLIDAY SETTING” on page 46.
• Set the timer program.
See “ ♦ Structure of the screen” on pages 44 and 45.
• Selecting the day.
• Selecting the start time.
• Selecting the end time.
• Selecting the recording mode.
• Selecting the motion detection mode.
Timer recording is executed/completed
See “ ■ Warnings and their appropriate countermeasures” on page 81.
Searching the recorded data
• Set the device to be searched.
See “ ♦ PLAYBACK DEVICE” on page 63.
• Select the camera number to be searched.
See “ ♦ SELECTION CAMERA NUMBER” on page 63.
• Select the search mode.
See “ ♦ SEARCH TYPE” on page 63.
• Set the alarm list search.
See “ ■ ALARM LIST SEARCH” on page 66.
• Set the time and date for alarm list search.
See “ ♦ DATE/TIME” on page 63.
The search is completed/The search result is displayed
Playback the search result
• Select the camera number to be played back.
See “” on pages 36 and 37.
• Select the sequence screen.
See “ ♦ SPLIT/SINGLE, +, and – button” on page 36.
• Playback
See “ ■ Basic playback” on page 26.
• Select the speed of playback.
See “ ■ Various playback functions” on page 62.