MITSUBISHI ELECTRIC DX-NT400E - Manual (Page 35)

35
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
Example: Setting titles of “ENTRANCE” and “COUNTER”
to camera number “
1 ” and “ 4 ,” respectively, and setting
memo of “BANK.”
1. Press the SET UP button } } Select
“CAMERA TITLE/MEMO SETTING” in the DISPLAY SETTINGS> screen and then press the ENTER
button.
• The screen appears.
4
1
2
3
>> ••••••••••••••••
••••••••••••••••
••••••••••••••••
••••••••••••••••
MEMO ••••••••••••••••
CLEAR:BACK
ENTER:CHARACTERS
2. Press the JOG , buttons to select camera number “ 1 ,”
and then press the ENTER button.
• The screen appears and the leftmost
character of the string is highlighted.
••••••••••••••••
! " # $%& ' ( ) + , -. / : ; < = >?@ •••••••
0123456789••••••••••••••••••••
ABCDEFGHIJKLMNOPQRSTUVWXYZ••••
abcde f gh i j k l mnopq r s t u v w x y z ••••
АБВГДЕЖЗИЙКЛМНОП СТУФХЦ Ш ЩЪЫЬ
Я••••••••••••••••••••••••••••
абвгдежзийкл м н о п стуфхц шщъыь
я ••••••••••••••••••••••••••••
CLEAR:BACK
3. Press the ENTER button.
• The leftmost character on the first line of the available
characters, “ ” (space), turns red and flashes.
4. Use the JOG , , , buttons to select “E” and then press
the ENTER button.
• “E” appears on the leftmost of the string and be highlighted.
5. Press the JOG or button to highlight the next character
on the right side.
6. Repeat steps 3 to 5 to input “ENTRANCE” in the string.
• To erase an input character, move the cursor to the leftmost
character, “ ” (space), then press the ENTER button to
determine such setting.
To change a character input in error:
1. While one of the characters in the string is
highlighted, press the JOG , , , and buttons
to highlight the character to be changed.
2. Follow the steps 3 and 4.
7. When completed with input, press the CLEAR button.
• The display returns to the SETTING> screen.
8. Repeat steps 2 to 7 for camera number “ 4 ” and MEMO.
4
1
2
3
>> ENTRANCE
••••••••••••••••
••••••••••••••••
COUNTER
MEMO BANK
CLEAR:BACK
ENTER:CHARACTERS
9. Press the CLEAR button or the SET UP button.
03-03-2003 21:25:40
ENTRANCE
COUNTER
Example
>>TIME DATE/DISPLAY SETTINGS
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION
MEMO: BANK
Example
■ DUPLEX MODE DISPLAY
This item is used to display the operational conditions such
as PLAYBACK, REC and ALARM REC (ALARM REC is
displayed in red during emergency recording), etc., on the
top or bottom of the screen.
TIME DATE ADJUST
DISPLAY MODE 1
CLOCK LOCATION SETTING
CAMERA DISPLAY NUMBER
CAMERA TITLE/MEMO SETTING
>>DUPLEX MODE DISPLAY BOTTOM
Setting (default : “BOTTOM”)
“BOTTOM”: Displays the operational condition on
the bottom of the screen.
“NONE”: Does not display the operational condition.
“TOP”: Displays the operational condition on the top
of the screen.
1. Press the SET UP button } } Select
“DUPLEX MODE DISPLAY” in the SETTINGS> screen. Display the desired setting and determine
such setting.
2. Press the CLEAR button or the SET UP button.