Troubleshooting (continued) – MITSUBISHI ELECTRIC DX-NT400E User Manual
Page 80
80
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Troubleshooting
Troubleshooting (continued)
O
THERS
The unit does not perform
the motion detection
function.
The unit does not respond
to PC control.
There is a camera number
with a blue screen during
split screen display.
Button operation is not
working.
• Is “TRIGGER” of the camera number for which the motion
detection function is to be executed in the
screen set to “EXT”?
• Is “A-PPS” of the camera number for which the motion detection
function is to be executed in the
to “- - - - - -”?
• Is “MOTION THRESHOLD” in the SETTINGS> screen set to the value larger than that of “DETECTION MASK SETTING”? • Is the • Are the unit and computer connected correctly? • Is there a defect in the connecting cable? • Is the proper connecting cable used? • The screens of camera number with no video signal input will be blue even when setting for operation. • Is the POWER button flashing? (The unit cannot be operated when the POWER button is flashing.) • Is the SIMPLE LOCK or PASSWARD LOCK turned on? Page Please consult the following Description of problem 41 42 38, 39 51, 52 - - - - 8 55 to 57