Motorola LS3478 - Manual (Page 81)

RS-232 Interface 6 - 3
RS-232 Default Parameters
Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the parameter descriptions section beginning on page 6-4 .
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 6-1 RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232 6-6
Baud Rate 9600 6-7
Parity None 6-9
Check Receive Errors Enable 6-10
Stop Bit Select 1 Stop Bit 6-11
Data Bits 8-Bit 6-11
Hardware Handshaking None 6-12
Software Handshaking None 6-14
Host Serial Response Time-out Minimum: 2 sec 6-16
RTS Line State Host: Low RTS 6-17
Beep on Disable 6-17
Intercharacter Delay Minimum: 0 msec 6-18
Nixdorf Beep/LED Options Normal Operation 6-19
Ignore Unknown Characters Send Bar Code 6-20