Motorola LS3478 - Manual (Page 27)

Getting Started 1 - 9
Inserting the Scanner in the Cradle
Insert the scanner in the cradle so that the metal contacts on the bottom of the scanner handle touch the contacts
on the cradle:
1. With a slightly rotated motion, insert the scanner into the cradle top first.
2. Push the handle until it clicks into place, engaging the contacts in the cradle and scanner.
Figure 1-7 Inserting the Scanner in the Cradle
Pairing
Pairing is the process by which a scanner initiates communication with a cradle. The cradle has multipoint
capability, and can pair with up to four scanners at a time. The cradle includes a pairing bar code.
To pair the scanner with the cradle, scan the pairing bar code on the cradle. A short low-high beep indicates
successful pairing.
NOTE The pairing bar code that connects the scanner to a cradle is unique to each cradle.
Do not scan data or parameters until pairing completes.