Scanning, Scanning -4 – Motorola LS3478 User Manual
Page 32
2 - 4
Symbol LS3478 Product Reference Guide
Scanning
to install and program the scanner. To scan.
1.
Aim the scanner at the bar code.
2.
Press the scan trigger.
Figure 2-2
Aiming the Scanner
3.
Ensure the scan line crosses every bar and space of the symbol.
4.
The scanner beeps and the LED turns green to indicate a successful decode. See
and
for
beeper and LED definitions.
Red fast flash
(two flashes per second)
Overcharge condition. Contact Motorola Enterprise Mobility Support.
Red slow flash
(one flash per second)
Battery voltage not increasing with charge. Replace the battery.
Red and green flash
Temperature fault. Move the cradle to a location where the temperature is 0
o
- 40
o
C;
optimal charging temperature is 5
o
- 35
o
C.
Table 2-2
LED Status Indications (Continued)
LED
Indication
012345
WRONG
012345
RIGHT