Motorola LS3478 - Manual (Page 22)

1 - 4 Symbol LS3478 Product Reference Guide
Figure 1-3 Cradle Back View
Connecting the Cradle
Important: Connect the interface cable and power supply in the following order to ensure proper operation of the
scanner and cradle. Note that this procedure includes two different power supply options.
1. Disconnect the power supply from the scanner cradle. See Figure 1-4 .
2. Insert the modular connector of the interface cable into the host interface port on the back of the scanner
cradle.
3. If using a power supply that connects to the interface cable, insert this power supply into the power connector
on the interface cable, and the other end to an AC supply (see the cradle’s Quick Reference Guide for more
information).
4. Insert the other end of the interface cable into the appropriate port on the host computer (see the specific host
chapter for information on host connections).
Rubber Foot
Rubber Foot
Mounting Screw Hole
Mounting Screw Hole
Power Cable Groove
Rubber Foot
Rubber Foot
Power Port Host Port
Host Cable Groove
Mounting Screw Hole
Converter Knob