Motorola LS3478 - Manual (Page 210)

13 - 8 Symbol LS3478 Product Reference Guide
Synapse Interface
The auto-detection of a Synapse cable varies in duration depending on the type of Synapse connection. If
connecting a scanner to another scanner using a Synapse cable, use the Auxiliary Synapse Port connection.
Otherwise, when using a Synapse cable, use the default setting.
To disconnect and reconnect the scanner from a Synapse cable that is connected to a live host via Synapse, use
the “Plug and Play” setting. Do not change this setting from the default if an on-board wedge host is enabled.
*Standard Synapse Connection
Auxiliary Synapse Port Connection
“Plug and Play” Synapse Connection