Power mode, Laser on time, Power mode -5 laser on time -5 – Motorola LS3478 User Manual
Page 49
User Preferences
4 - 5
Power Mode
This parameter determines whether or not the scanner enters reduced power mode after a decode attempt. When
in reduced power mode, the scanner draws less current from its battery.
Continuous On
*Reduced Power Mode
Laser On Time
This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes from
that correspond to the desired on time. Include a leading zero for single digit numbers. For example, to
set a Laser On Time of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar codes. To correct an error
or change the selection, scan Cancel on
.
Laser On Time