Motorola LS3478 - Manual (Page 44)

3 - 8 Symbol LS3478 Product Reference Guide
Scanner Signal Descriptions
The signal descriptions in Table 3-4 apply to the 10-pin RJ connector on the scanner cradle and are for reference
only.
Figure 3-1 illustrates the positions of the cradle pins.
Figure 3-1 Cradle Pin Assignments
The signal descriptions in Table 3-5 apply to the connector from the scanner to the scanner cradle and are for
reference only.
Table 3-4 Scanner Cradle to Host Pin-outs
Pin IBM Synapse RS-232
Keyboard
Wedge
Wand USB
Scanner
Emulation
1 Reserved SynClock Reserved Reserved Reserved Jump to Pin 6 DBP
2 Power Power Power Power Power Power Power
3 Ground Ground Ground Ground Ground Ground Ground
4 IBM_A(+) Reserved TxD KeyClock DBP Reserved SOS
5 Reserved Reserved RxD TermData CTS D + Decode
6 IBM_B(-) SynData RTS KeyData RTS Jump to Pin 1 Trigger
7 Reserved Reserved CTS TermClock Reserved D - Enable
8 Reserved Reserved Reserved Reserved Reserved Reserved Reserved
9 Reserved Reserved Reserved Reserved Reserved Reserved Reserved
10 Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Table 3-5 Scanner to Scanner Cradle Pin-outs
Pin Description
1 VCC
2 CRADLE_TXD
3 CRADLE_RXD
4 GND
Pin 1 Pin 4 Pin 3 Pin 2