Motorola LS3478 - Manual (Page 164)

12 - 10 Symbol LS3478 Product Reference Guide
UPC/EAN/JAN Supplemental Redundancy
With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a
symbol without supplementals is decoded before transmission. The range is from two to 30 times. 14 or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the
autodiscriminate option is selected. The default is set at 14.
Scan the following bar code to set a decode redundancy value. Next, scan two numeric bar codes from Appendix
D, Numeric Bar Codes . Use a leading zero for single digit numbers. In case of an error, or to change the selection,
scan Cancel on page D-3 .
UPC/EAN/JAN Supplemental Redundancy
Transmit UPC-A/UPC-E/UPC-E1 Check Digit
The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar
code to transmit the bar code data with or without the UPC-A, UPC-E or UPC-E1 check digit. It is always verified to
guarantee the integrity of the data.
UPC-A Check Digit
*
Transmit UPC-A Check Digit
Do Not Transmit UPC-A Check Digit