Inserting the battery, Removing the battery, Inserting the battery -7 – Motorola LS3478 User Manual
Page 25: Removing the battery -7
Getting Started
1 - 7
Inserting the Battery
The battery resides in a chamber in the scanner handle. To insert the battery:
1.
Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise
to release the latch.
2.
Lift the latch.
3.
If a battery is already installed, turn the scanner upright to slide the battery out.
4.
Slide the new battery into the chamber, with the rounded side toward the back and the contacts facing into the
chamber.
Figure 1-6
Inserting the Battery
5.
Close the latch.
6.
Insert a coin or flathead screwdriver in the slot at the base of the scanner, press down gently, and turn the slot
clockwise to lock the latch in place.
Removing the Battery
To remove the battery:
1.
Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise
to release the latch.
2.
Lift the latch.
3.
Turn the scanner upright to slide the battery out.