Motorola LS3478 - Manual (Page 184)

12 - 30 Symbol LS3478 Product Reference Guide
Interleaved 2 of 5 (I 2 of 5)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.
*
Enable Interleaved 2 of 5
Disable Interleaved 2 of 5
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Lengths for I 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - This option allows the scanner to decode only those I 2 of 5 symbols containing a selected
length. Lengths are selected from the numeric bar codes in
Appendix D, Numeric Bar Codes . For example, to
decode only I 2 of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4.
In case of an error, or to change the selection, scan Cancel on
page D-3 .
I 2 of 5 - One Discrete Length
Two Discrete Lengths - This option allows the scanner to decode only those I 2 of 5 symbols containing
either of two selected lengths. Lengths are selected from the numeric bar codes in
Appendix D, Numeric Bar
Codes . For example, to decode only those I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the selection, scan
Cancel on
page D-3 .
I 2 of 5 - Two Discrete Lengths