Motorola LS3478 - Manual (Page 143)

Scanner Emulation Interface 10 - 5
Scanner Emulation Host Parameters
Beep Style
The scanner emulation host supports three different beep styles.
• Beep On Successful Transmit (default): The scanner beeps when the attached decoder issues the decode
signal to the scanner. This way, the scanner and the decoder beep at the same time.
• Beep at Decode Time: The scanner beeps on its decode. This results in a double beep sequence from most
decoders, since the scanner beeps, and the decoder beeps (at a different frequency) when it successfully
decodes the output.
• Do Not Beep: The scanner does not beep; the attached decoder issues the decode beep.
In all cases, if an error occurs, the scanner issues error beeps.
*Beep On Successful Transmit
Beep at Decode Time
Do Not Beep