MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 169)

6 - 10
6. SERVO CONFIGURATION SOFTWARE
(c) Read from the general-purpose registers (c))
Click the "Read All" button to read the values of the general-purpose registers (R1 to R4, D1 to D4)
stored in the servo amplifier.
(d) Write to the general-purpose registers (d))
Click the "Write All" button to write the set values of the general-purpose registers (R1 to R4, D1 to
D4) to the servo amplifier.
(e) Closing the Indirect Addressing window (e))
Click the "Close" button to close the window.