Maintenance and troubleshooting – MK Diamond Products MK CX-3 User Manual
Page 22

MK CX-3
Revision 09/04, Effective Date September 17, 2004
Page 22
MAINTENANCE AND TROUBLESHOOTING
3. Weekly (50 Hours) and Monthly (200 Hours) Maintenance:
The following should be performed monthly. Items should be lubricated using waterproof grease.
(D)
Lubricate the Blade Shaft Bearings
(Monthly)
(B)
Lubricate the Height Adjusting
Wheel Bearing (Monthly)
(E)
Clean engine Air Filter Weekly and
Replace Monthly
(See Engine Air Filter Inspection
Cleaning and Replacement)
(F)
Clean Fuel Sediment Cup Monthly
(See Fuel Sediment Cup Cleaning)
Fuel Sediment Cup
(H)
Lubricate the Wheel Assemblies
(G)
Lubricate the engine Throttle
Linkage
(I)
Verify the tightness of all bolts
and screws found on the CX-3
(C)
Lubricate the Depth Control
Screw (Monthly)
Throttle
Linkage
Height Adjusting
Wheel Bearing
Air Filter
Wheel
Assemblies
Depth Control
Screw
Shaft
Bearings
Tighten all bolts
and screws
(A)
Change engine oil
(Every 100 Hours; See Engine Oil
Change)
Change Oil