Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 45)

41
RS-232 / TELNET / UDP COMMANDS
f Command
The
f command enables / disables the +5V on the specified input. Do not precede this
command with the “#” symbol.
Syntax:
f param1 param2
Parameters:
param1
Input [1 ... 16]
param2 State [0 ... 1]
Value Meaning
0 Disable
1 Enable
Notes:
If param1 = 0, then all inputs will be affected.
Examples:
f 15 1
Enable F0 15
f 0 1
Enable All FO
WARNING: Use caution when applying power to inputs. If the
source device supplies +5V on the input, then enabling the +5V
may cause damage to the source and/or the 16x16 DVI Matrix.