Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 39)

35
RS-232 / TELNET / UDP COMMANDS
Miscellaneous
Command Description
#activebolo Activates the boot loader for firmware updates
#fadefault Resets the matrix to factory default routing
#help Displays all available commands
#lock_fo Toggles the +5V lock power state
#set_input_name Specifies a name for an input
#set_ir Sets the IR channel of the matrix
#set_output_name Specifies a name for an output
#show_temp Displays the board temperatures
#show_user_name Displays the TCP user name
#show_ver_data Displays the current hardware
#show_voltage Displays the board voltages
f Toggles / displays +5V input
m Displays the current routing status in tabular
form
#fadefault Command
The #fadefault command disables the EDID lock state, sets the default routing state (1-1,
2-2, 3-3, etc.) and resets the input and output names to the default names (e.g. Output 1,
Input 1).
Syntax:
#fadefault
Parameters:
None