Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 10)

6
PANEL DESCRIPTIONS
1 Control Buttons
These buttons are used to navigate the functions of the 16x16 DVI Matrix. For complete
details on these controls and how they are used, see pages 10 - 13.
2 Infrared (IR) Receiver
This IR receiver will accept commands from the RMT-16416IR remote control. Line-of-
sight between this receiver and the remote controls needs to be preserved for proper
operation.
3 Power LED Indicator
This LED indicator will be active when the included 24V DC power supply is properly
connected to the unit.
4 Cancel Button
This button is used to return the user to the main status screen once a routing change has
been initiated and the user decides to not continue with the change.
5 Main LCD Display
This 2 line 16 character display will display status information and is also used to manage
the display/source routes.
6 DVI Input Ports 1-16
These inputs are used to connect up to 16 DVI-capable sources.
7 10/100 Ethernet Control Interface
This port is used to connect the 16x16 DVI Matrix to a network for IP control. See page 16
for more information.
8 24V DC Power Receptacle
The port will accept power from the included 24V DC power supply.
9 DVI Output Ports 1-16
These outputs are used to connect up to 16 DVI-capable displays.
10 RS-232 Serial Communications Interface
This interface was designed to accept commands from an external control system. This
port will allow switching commands as well as EDID management and configuration
operations. See page 15 for more information.
11 IR Extender Jack
Accepts an optional IR Extender which allows relocation of the IR receiver up to 6 feet
away from the Matrix.