Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 28)

24
RS-232 / TELNET / UDP COMMANDS
#set_http_port Command
The #set_http_port command sets the Web server listening port. The default port is 80.
Syntax:
#set_http_port param1
Parameters:
param1
Port [0 ... 65535]
Notes:
The matrix must be rebooted after executing this command.
#set_tcp_term_pass Command
The #set_tcp_term_pass command sets the TCP password. The maximum length of the
password is 20 characters and is case-sensitive. The default password is Admin.
Syntax:
#set_tcp_term_pass param1
Parameters:
param1
Current password
param2 New password
param3 New password (confirm)
Notes:
The matrix must be rebooted after executing this command.
Example:
#set_tcp_term_pass Admin reindeer reindeer
TCP Terminal password updated to: reindeer