Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 36)

32
RS-232 / TELNET / UDP COMMANDS
r Command
The r command routes the specified input to the specified outputs.
Syntax:
r param1 param2[...param17]
Parameters:
param1
Input [1 ... 16]
param2 Outputs [1 ... 16]
Notes:
If param2 = 0, then the specified input is routed to all outputs.
Examples:
r 7 3 4 5 6 10 12
Input 7 is routed to outputs: 3 4 5 6 10 12
r 2 0
All outputs are routed to Input 2
s Command
The s command routes the specified input to all outputs.
Syntax:
s param1
Parameters:
param1
Input [1 ... 16]
Example:
s 1
All outputs are routed to Input 1