beautypg.com

Rs-232 / telnet / udp commands – Gefen DVI MATRIX EXT-DVI-16416 User Manual

Page 31

background image

27

RS-232 / TELNET / UDP COMMANDS

#sgateway Command
The #sgateway sets the IP gateway (router) address. Dot-decimal notation must be used

when specifying the IP address. The default gateway is 192.168.1.254.

Syntax:
#sgateway param1

Parameters:
param1

IP gateway

Notes:

The matrix must be rebooted after executing this command.

Example:
#sgateway 192.168.1.1
New IP Gateway set to: 192.168.1.1

#show_tcp_term_pass Command
The #show_tcp_term_pass command displays the current TCP password for login

(if required).

Syntax:
#show_tcp_term_pass

Example:
#show_tcp_term_pass
TCP Terminal password: reindeer

See also other documents in the category Gefen Computer Accessories: