Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 37)

33
RS-232 / TELNET / UDP COMMANDS
Masking
Command Description
#maskout Masks the selected (video) output(s)
#unmaskout Unmasks the selected output(s)
#maskout Command
The #maskout command allows blanking of the specified outputs.
Syntax:
#maskout param1 param2
Parameters:
param1
Output [1 ... 16]
param2 State [0 ... 1]
Value Meaning
0 Unmask
1 Mask
Notes:
If param1 = 0, then all outputs will be masked.
The current masking state will be lost if power is interrupted or if the masking state is not
saved (see #savepreset on page 31).